SOUND4YOU 661699 Portable Wireless Stereo Speaker User Manual

Portable Wireless Stereo Speaker
USER MANUAL
661699

Congratulations and thank you for purchasing this Schwaiger product. This user guide is designed to help you use and operate the device. Read through the instructions for use carefully. Store this manual safely throughout the product‘s entire service life and pass it on to any subsequent users or owners. Check that the supplied package is complete and ensure that none of the parts are defective or damaged.
Intended use
This Bluetooth® stereo speaker with the light band is used for wireless playback of audio files. The speaker can be connected either via Bluetooth® or a 3.5 mm jack cable to smartphones, tablets, computers, or other playback devices. The built-in magnets make it easy to hold both parts of the dual speaker together. General safety and maintenance instructions

WARNING

This product is intended for private, non-commercial household use.
This product is an electronic product that must be kept away from children. Therefore, keep it out of reach of children.

Do not drop the product or expose it to strong shocks.
Do not introduce any objects into the product’s connections or openings.

Do not disassemble the product into its individual parts. The unit does not contain any user-serviceable parts. Incorrect assembly can cause electric shocks or malfunctions.
Clean this product only using a lint-free, damp cloth that is as light as possible and does not use any aggressive cleaning agents. In doing this, especially ensure that no water (no fluid or moisture) gets into the product.

The product is IPX5 rated. When the cable connections are closed, it is protected against water jets from all directions and dust.
Never expose the loudspeaker to high temperatures or extreme cold.

Do not use the unit outdoors during storms.
Keep the speaker away from an open fire.

To ensure adequate ventilation, do not cover the speaker and ensure that there are no objects in the immediate vicinity (approx. 50 mm) of the speaker.

CAUTION

Listening at excessively high volume can cause hearing damage! Always keep the volume at a reasonable level. High volume, even for a short time, can cause damage to hearing.
Important safety instructions on the integrated battery When used properly, rechargeable lithium-ion and lithium polymer batteries provide a safe and reliable source of power for mobile devices. Incorrect use may cause the battery to discharge, catch fire, explode, or fragment, potentially injuring you or damaging your device

The battery is permanently installed in the casing. It cannot be replaced.

Never throw the product into a fire as it may explode or cause a flame hazard
Recharge the device battery on a regular basis, even if you do not use it for a longer period of time (about every 3months). Otherwise, they may become deep discharged and permanently unusable.

The batteries do not need to be discharged before being recharged.
Place the product on a surface that is not sensitive to heat when recharging. It is normal for the product to become slightly warm when recharging.

Dead or damaged batteries may cause skin irritation, so use suitable gloves.
Leaking battery fluids are highly corrosive and may seriously damage objects or surfaces they come into contact with.

Product details

Switching on	Press and hold the On/Off button for 2-3 seconds.	LED lights up blue
Switching off	Press and hold the On/Off button for 2-3 seconds.	LED off
Light band	Press the light button lx to switch on the strip light permanently, once more to let the strip light flash slowly and pulsatingly, once again to switch it off again.
Volume louder	Briefly press the Volume Plus button.
Volume lower	Briefly press the Volume Minus button.
Next track	Press and hold the Volume Plus button for 1 second.
Previous track	Press and hold the Volume Minus button for 1 second.
Play / Pause / Mute	Briefly press the Play button (In AUX mode, to mute).
Taking a call	Briefly press the Play button on an incoming call	LED lights up blue
Declining a call	Press and hold the Play button on an incoming call	LED lights up blue
Finishing a call	Briefly press the Play button during a call	LED lights up blue

Package Contents
Bluetooth® Loudspeaker, Type C charging cable, lx 3.5 mm jack cable, operating instructions, and safety instructions Initial operation
NOTE
It is recommended to fully charge the integrated battery before using the product for the first time.
Process:
1. Use the supplied Type C cable and plug the Type C connector into the appropriate socket under the protective cover on the side of the product.
2. Now connect the USB plug of the charging cable to a USB charging adapter or an active USB socket (e.g. laptop or computer).
3. During the charging process, the status LED on the device flashes red/blue. As soon as the battery is fully charged, it will glow red permanently.
The speaker automatically turns off when the battery charge is less than 3%. Modes and functions

LED code	Meaning
Red flashing light	Low battery charge (<10%)
Red / Blue flashing light	Battery is charging
Red / Blue light off	Battery is charged

Power ON/OFF

Press the POWER ON/OFF button until a short beep sounds and the blue Status LED light turns on.

Press the POWER ON/OFF button again until a short beep sounds and the blue Status LED light turns on.

Pairing mode (Bluetooth® pairing)

Turn on the speaker as described above.
Search and select “LBS20” in the Bluetooth® settings of your mobile device.

The status LED lights up blue and you will hear a short beep as soon as the loudspeaker is connected to your device.

NOTE:

The loudspeaker should be no further than within a radius of 10 m around your device.
If the speaker is on, it will automatically connect to the last connected device, if available. If not, the speaker switches to pairing mode. (The speaker can store a maximum of 8 already connected devices)
The speaker turns off automatically after 10 minutes if it is not connected to a device during this time.

Disconnecting Bluetooth® connection manually (uncoupling)
Press and hold the Volume Plus and Volume Minus buttons for 1 second until the LED status light quickly flashes blue again. You will hear a short beep. The speaker has then disconnected from your Bluetooth® device and in pairing mode again.
Switching the light band on/off
To switch on the light band, which connects both loudspeakers, press the light button 1x. The light band then lights up permanently. With another click on the light button, the light band begins to light up alternately and pulsatingly and the light is no longer permanently on. By another click on the light button, you switch off the light strip again, whereupon it no longer lights up.

Connection via AUX input

Turn on the speaker as described above.
Use the supplied 3.5 mm jack cable to connect your external device to the AUX-In connector of the speaker.
The speaker will automatically switch to AUX-In mode and the Status LED light will turn steady green.

NOTE:

In AUX-IN mode, the “Skip Songs” and “Handsfree” functions are not available. In this mode, the operation is exclusive via the connected playback device.
To return to Bluetooth® mode, simply pull the 3.5 mm jack cable out of the socket on the loudspeaker.

Resetting the speaker
If you experience problems with the speaker, you can easily reset it. To do this, disconnect it from the charger cable and gently push a thin needle (diameter <3 mm) into the RESET hole provided for this purpose for 2 seconds until the status LED light goes out. The RESET hole is located on the back of each speaker next to the AUX input. Troubleshooting Speaker does not turn on
Charge the speaker and make sure it has enough power. Speaker does not connect to my device Please check the following: The Bluetooth® device supports Bluetooth® A2DP profiles; the speakers are within 10 m or less of your device; The loudspeaker is in pairing mode (LED status light is blue).
No sound
Make sure that the volume on both the speaker and your device is set to an audible level. Make sure that your device is successfully connected to the speaker. The Status LED light is permanently blue.
Poor sound quality
Reduce the distance between the speaker and your device and remove any obstructions in between.

Contents hide

1 Technical data

2 Documents / Resources

2.1 References

3 Related Posts

Technical data

Model description / Bluetooth® Pairing Name	LBS20
Bluetooth® version	V4.2
Bluetooth ® Profile	HFPV1.5, A2DPV1.2, AVRCPV1.4, GAVDPV1.2, AVDTPV1.2, SPPV1.2, AVCTPV1.2
Bluetooth® range	10 m
Output	2x 5 W
Speaker Driver	q 2x 45 mm (4Q, 2x 5W)
Frequency range	150 Hz – 15 kHz
Signal-to-noise ratio (SNR)	270 dB
Battery type	Lithium-Ion (3,6 V / 1.500 mAh)
Power supply	Input: DC 5V, 1A
Playing time	6 – 15 h (depending on volume and type of playback)
Recharging time	Approx. 2 h
Connector	lx Type-C socket, lx 3.5 mm jack socket
Protection class	IPX7
Dimension	183 x 81 x 92 mm
Weight	650 g

Cleaning and maintenance
This product is maintenance-free. You must disconnect the device from the main socket before cleaning. Ensure that no liquids get into the product while you are cleaning it. The use of solvent-containing or aggressive cleaning agents, as well as alcohol or thinners, is prohibited as it could damage the coating or the surface of the product. You should, therefore, clean the product with a lint-free, ever so slightly damp soft cloth only.
Disposal
The product is delivered in packaging made of recyclable materials to protect against damage during transport. Sort and dispose of these materials in the designated containers. Ask your local disposal company or local council about how to dispose of the product in an environmentally correct way. Do not dispose of batteries or electric and electronic devices in the normal household waste.
The consumer is legally obliged to return electrical and electronic devices and batteries that are at the end of their useful life to the point of sale or public collection points that have been set up for this purpose. Legislation in the country of use stipulates the specific requirements regarding disposal. The symbol on the product, the user guide, or the packaging indicates this legal requirement.
Disclaimer
Schwaiger GmbH does not accept any liability or warranty for damages that are sustained due to improper installation or mounting, improper use of the product, or compliance with the safety instructions. Manufacturer’s information Dear Customer, please contact our Technical Support if you need technical advice and your retailer is unable to help you. Our technical support is available in English or German.
Information on warranty
The warranty period starts when the device is purchased. The purchase receipt serves as proof of this date. Keep these documents in a safe place. Our warranty is based on our warranty conditions valid at the time of purchase.

Simplified declaration of conformity as per the RED Directive
Schwaiger GmbH hereby declares that the described radio system product complies with Directive 2014/53/EU and other directives applicable to the product. The complete EU declaration of conformity is available online at: http://konform.schwaiger.de

661699 Schwaiger GmbH
Würzburger Straße 17
90579 Langenzenn
Hotline: +49 (0) 9101 702-299
www.schwaiger.de
info@schwaiger.de
Geschäftszeiten: Montag bis Freitag: 08:00 – 17:00 Uhr
Office Hours: Monday to Friday: 8:00 a.m. – 5:00 p.m.
661699_BDA