POWDERS Part I. POWDERS are solid dosage forms for internal and external application consisting from one or some medicinal substances and having a loose.

Presentation on theme: "POWDERS Part I. POWDERS are solid dosage forms for internal and external application consisting from one or some medicinal substances and having a loose."— Presentation transcript:

1 POWDERS Part I

2 POWDERS are solid dosage forms for internal and external application consisting from one or some medicinal substances and having a loose property

3 ADVANTAGES OF POWDERS The simplicity of preparation, convenience of administration and good bioavailability (comparing with tablets). The universality of composition. It means that in the form of powders it is possible to combine medicinal substances, which are different by the structure and properties. It is possible to measure powders precisely. The convenience of storage and transportation.

4 DISADVANTAGES OF POWDERS A poor safety, which it is connected with a large specific surface. They lose or absorb water, they are readily oxidized, ets. Inconvenience of administration of aromatic, colouring substances and substances having unpleasant taste. Some medicinal substances in the form of powders can irritate the mucous membrane of the stomach with internal use.

5 METHODS OF POWDER PRESCRIBING : Distributive - the prescription indicates the amount of a substance per one dose and amount of doses, which are necessary to prepare (this method is the most frequently used). Separating - the prescription indicates of a medicinal substance for all powders at once and the quantity of doses, which are necessary to divide the total mass

6 Distributive Rp.: Dibazoli 0.01 Papaverini hydrochloridi 0.02 Sacchari 0.25 Misce, fiat pulvis Da tales doses N 10 Signa. 1 powder 3 times a day.

7 Separating Rp.: Dibazoli 0.1 Papaverini hydrochloridi 0.2 Sacchari 2.5 Misce, fiat pulvis Divide in partes aequales N 10 Signa. 1 powder 3 times a day.

8 THE MAIN TECHNOLOGICAL PROCEDURES OF PREPARING POWDERS Weighing, powdering (grinding) and sifting of medicinal substances.

9

10

11

12

13 THE MAIN TECHNOLOGICAL PROCEDURES OF PREPARING POWDERS Blending of components (for complex powders).

14 THE MAIN TECHNOLOGICAL PROCEDURES OF PREPARING POWDERS Dosing on a mass, packing of doses and quality control of powders.

15 THE MAIN TECHNOLOGICAL PROCEDURES OF PREPARING POWDERS Powder registration for dispensing.

16

17

18 In all variety of prescription of complex powders 2 cases may be distinguished: The 1-st case - when the medications of a complex powder are prescribed in equal or approximately equal amounts;

19 In all variety of prescription of complex powders 2 cases may be distinguished: The 2-nd case - when the medications of a complex powder prescribed in extremely different amounts.

20 The 1-st case - when the medications of a complex powder are prescribed in equal or approximately equal amounts In the first case, when medicinal substances are prescribed in equal amounts and their physical and chemical properties are the same, the order of blending has not significant, they are mixed in order of prescribing, as a rule.

21 The 1-st case - when the medications of a complex powder are prescribed in equal or approximately equal amounts If the amounts of prescribed substances are the same, but their physical and chemical properties differ, there are following rules of blending: The substance without activity should be powdered first.

22 The 1-st case - when the medications of a complex powder are prescribed in equal or approximately equal amounts If there is no substance without activity in the prescription, at first - the substance having the least percent of rubbing losses in pores of a mortar. Frequently the value of powder’s losses is explained by electrization of mortar’s wales and a powder (different charges). Therefore, it is important to foresee the value of losses correctly for solving the problem of ingredients’ trituration in a clean mortar because the losses while triturating a substance in a clean mortar are rather great.

23 The 1-st case - when the medications of a complex powder are prescribed in equal or approximately equal amounts At first the coarse-crystalline substances should be powdered, then fine- crystalline ones and, at last, amorphous ones. The heavy substances should be added in the mortar first, then –lighter substances are added. The easily spraying substances added last.

24 The 2-nd case - when the medications of a complex powder prescribed in extremely different amounts. When the medicinal substances of a complex powder are prescribed in different amounts, the main rules of blending are:

25 Start powdering in the mortar with medicinal substances without therapeutical activity, and if there is not such substance in the prescription, the preparation should begin from a component prescribed in greater quantity and which is less loss in the mortar’s pores (taking into account the crystalline structure and spraying ability of a substance).

26 The 2-nd case - when the medications of a complex powder prescribed in extremely different amounts. After that it is necessary to start powdering and blending of medicinal substances which prescribed in the smallest amount ( in the mortar where the substance without activity previously added).

27 The 2-nd case - when the medications of a complex powder prescribed in extremely different amounts. Then add the remaining components gradually, taking into account their amounts. The procedure of blending from the smallest component to the biggest one must be the same.

28 The 2-nd case - when the medications of a complex powder prescribed in extremely different amounts. The homogeneity of a powder mixture is reached when components are prescribed in the ratio from 1:1 (for poisonous and strong-effective substances) to 1:5 (for substances of the general list).

29 The 2-nd case - when the medications of a complex powder prescribed in extremely different amounts. When the ratio is increased more than 1:5, the homogeneity of a mixture is greatly disturbed.

30 THANK YOU FOR ATTENTION!