Werner 25-26 End Caps Kit for Extension Ladders
Werner 25-26 End Caps Kit for Extension Ladders
For Aluminum Ladders. Hardware Included.
*Note: Actual product may visually differ from image shown.
Fits on the Following Model(s):
- D1716-2EQ
- D1720-2EQ
- D1724-2EQ
- D1728-2EQ
- D1816-1EQ
- D1820-2EQ
- D1824-2EQ
- D1828-2EQ
- D8220-2EQ
- D8224-2EQ
- D8228-2EQ
Finding MK or Mark Number:
For ladders manufactured after 2001: Locate your ID Label to identify your model and mark numbers as show in the illustration. On an attic ladder, if you don’t find a label that includes a mark (MK) number and a label or ink stamp indicates that ladder was manufactured by Kentucky Ladder or Werner Ladder use 3 as your mark number. Please note: this can only be applied to attic ladders
For ladders manufactured before 2001: Locate the Code Stamp to determine the mark (MK) number.Fiberglass Stepladders – code stamp is on the underside of the bottom stepAluminum Stepladders – code stamp is located under the bottom step or on the inside of either side rail below the bottom stepFiberglass Extension Ladders – code stamp is on the outside of the aluminum rail shield at the foot of the ladderAluminum Extension Ladders – code stamp is located within 4 feet from the bottom on either the base or fly section.Once you have located the code stamp, determine your mark number, it will be the first two digits following the first letter as shown.See image gallery for example
Weight(LBS) | 0.150000 |
---|---|
Part Type | End Caps Kit |
Ladder Style | Extension Ladders |
Fits Model(s) | D1716-2EQ, D1720-2EQ, D1724-2EQ, D1728-2EQ, D1816-1EQ, D1820-2EQ, D1824-2EQ, D1828-2EQ, D8220-2EQ, D8224-2EQ, D8228-2EQ |