We offer wholesale discounts on all of our products. E-mail us for details.

Mora Knife Blade No. 2000 Stainless

M-191-250062

This is the blade from the Mora 2000 knife, which has an interesting drop-point profile which thins out as it approaches the tip, which makes this an excellent choice for making a skinning knife. While not a true "full tang" knife, the tang isn't a stick but is rather around 50% of the blade width, which would make a very strong, durable knife.

Below are the detailed measurements of this blade:
  Overall Length: 7.375 inches (18.7 cm)
  Blade Length: 4.25 inches (10.8 cm)
  Blade Width: 0.9 inches (2.3 cm)
  Blade Thickness: 0.09 inches (2.3 mm)
  Blade Weight: 1.7 ounces (48 grams)
  Tang Length: 3 inches (7.6 cm)
  Tang Thickness: 0.09 inches (2.3 mm)
  Tang Width (At Blade): 0.54 inches (1.4 cm)
  Tang Width (At End): 0.46 inches (11.7 mm)
  Blade Material: stainless steel

Here are the fittings that this blade can be paired with, based on the sizes of the blade, tang, and slot. Any fitting labelled "might be too small/big" will still fit the blade, but might not be a good match depending on the style of knife that you're making.

  Bolster 16mm x 24mm Brass Shaped: might be too small
  Bolster 16mm x 24mm Nickel Shaped: might be too small
  Bolster 18mm x27mm Brass Shaped: **BEST FIT**
  Bolster 18mm x 27mm Nickel Shaped: **BEST FIT**
  Bolster 18mm x 35mm Brass Shaped: might be too big
  Bolster 18mm x 35mm Nickel Shaped: might be too big
  Bolster 19mm x 30mm Brass Shaped: might be too big
  Bolster 19mm x 30mm Nickel Shaped: might be too big
  Bolster 21mm x 32mm Brass Shaped: might be too big
  Bolster 21mm x 32mm Nickel Shaped: might be too big