Metalpart washing maschine

FRANKE TFA-900 I-RST, Neupreis 120.000,-€

load capacity: 200 kg, Year of construction: 2000, operating hours: 13,023 h, Condition: used, Single chamber spray cleaning system FRANKE type SRR 1250 I-RST Manufacture # A000062 Year of construction 10/2000 Process: Cleaning, rinsing, hot air drying SRR - overhead rotating baskets (rhönrad principle) Technical data: Permissible filling volume 1400 l Permissible load capacity 200 kg Permissible solvent water Usable dimensions approx. 1250 x 400 mm Usable height approx. 300 mm Heating capacity 54 kW Temperature max. 70° Charging height 1100 mm Throughput capacity 4 - 8 batches / hour Basket holder for 2 baskets 600 x 400 x 300 mm or 1 x 1250 x 400 x 300 mm Max. basket weight 100 kg Operating voltage 3 x 230/ 400 V Compressed air max. 8 bar Heating capacity 54 kW Electrical connected load 67 kW Dimensions L x W x H approx. 2200 x 2300 x 2600 mm Width with front table 3600 mm Weight approx. 3000 kg Blxglfkipa7 with - SIEMENS Simatic OP 7 - Oil skimmer with surface flood pump - Spray system on all sides - Transverse sliding table - Feeding trolley - Various baskets - for alkaline or phosphating cleaners - Hour counter: 13023 h used, in good condition The rotating or swiveling basket holder ensures that parts are displaced in the basket. This results in intensive rinsing and emptying of scooping points. Chips, dirt, grease etc. are effectively removed.

Year of construction: 2001, Condition: refurbished (used), Functionality: fully functional, Used parts cleaning system / single chamber spray cleaning system The system was partially overhauled by the manufacturer in 2023 for €9,000 and is in very good condition. All technical data and information can be found in the operating instructions. Bng2aitz720

mileage: 211,487 km, power: 375 kW (509.86 HP), first registration: 03/2022, overall weight: 18,000 kg, fuel type: diesel, color: grey, axe configuration: 4x2, maximum load weight: 9,726 kg, empty load weight: 8,274 kg, tire size: 385/55 u. 315/70 R 22.5, next inspection (TÜV): 03/2025, fuel: diesel, wheelbase: 3,800 mm, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air/air, Year of construction: 2022, Condition: used, Functionality: fully functional, machine/vehicle number: 29021, Equipment: ABS, Air conditioning, Cruise control, Differential lock, Low noise, Navigation system, Onboard computer, Parking heater, Sleeping cabin, Spoiler, Traction control, our vehicle number #29021 Globetrotter XL EURO VI 375 kW 510 HP 4x2 Wheelbase 3.800 mm Retarder Suspension LL Tire size 385/55 and 315/70 R 22.5 Tank size 610 liters + 365 liters Color grey metallic Semi-mounted height 1,150 mm Gross vehicle weight 18,000 kg Payload 9,726 kg Unladen weight 8,274 kg Alloy wheels Differential lock I-Shift transmission Air conditioning Low noise Disc brake Auxiliary heating Cruise control Traction control I-ParkCool (stationary air conditioning) Driver's swing seat/heated 2 recliners Refrigerator Info and media package with navigation system el. Roof hatch el. Sunblind ESP Hill start assist ACC adaptive cruise control AEBS emergency braking function FCW collision warning system Lane departure warning Cornering assistant Front camera right Full spoiler FH rear air suspension C92cyhe Front passenger swivel seat ZV w. FB N-SW A-SW Sun visor Lamp bracket w. Z-SW el. 2-way power windows el. Exterior mirrors/heated DPF DAS LED daytime running lights TV pre-installation Multi-leather steering wheel On-board computer Light and rain sensor Roller blind left and right Traffic sign recognition Axle load indicator SW cleaning system Leasing or financing possible on request!!!

Condition: used, tank capacity: - l percentage of cleaning: µ total power requirement: 2,2 kw E2ns8b3 volume capacity: max: 1329 m³/h filter surface area: m² filter: weight of the machine approx.: 88 kg dimensions L x W x H: m

Condition: new, SSI Schäfer PR 600 trusses in 2nd choice TRV1-190-10 I 1,900mm (SSI RRP in 1st choice incl. 19% TZ €79.31 net) approx. 100 pieces available Clear field width 1,900mm Load per pair: approx. 4,200kg Other sizes on request. Over 5,000 trusses in various sizes in stock at all times. Shipping possible for an extra charge. You will receive an invoice with VAT. Chwsyffb9j Example images - original images per item on request

Year of construction: 2013, Condition: ready for operation (used), General Data Measurements width 3500 mm Bj2dbuudpvv Measurements depth 3880 mm Machine weight 3690 kg Main Drive Spindle speed range 10000 Number of axis 3+1 Table Table load 250 kg This First V700 Vertical Machining center was manufactured in the year 2013 in Taiwan. It has 3+1 axis. The machine has a spindle speed of 10000 rpm. Application Types Milling

Condition: used, trailer work platform Sagafirst TBL 16A with a working height of almost 18m. Driven electrically via batteries or via a petrol engine. Tire drive available and rotating work basket! Year of construction 2023 Load capacity 230kg U7comooa Alko brake system! No Austrian approval -> individual approval required! CE paper available!

Year of construction: 2023, Condition: new, New 11 kW screwcompressor FirstAir Type: FAS11 Year of construction: 2023 technical spezifications: operating pressures of the system: 8 bar(ue) at 8 bar : 1,74 m³/min Installed power: 7,4 kW speed drive motor: 2930 1/min SProtection class / Insulation class Drive motor: IP55 / F Operating voltage / frequency: 400/50 V / Hz Sound pressure level (DIN 45635 T13) : 68 +/- 3 Compressed air connection:G 3/4" Length : 880 mm Width : 830 mm Height : 1075 mm Weight : 300 kg Bkkj8ncq

Year of construction: 2004, Condition: good (used), machine/vehicle number: 30700075, X travel 610 mm Y travel 500 mm Z travel 510 mm Cunnbdhwo ATC 24 positions, double arm changer CNC control HEIDENHAIN iTNC530 Spindle speed 8000 rpm BT 40 Spindle motor 7,5 kW Work feed 1-8000 mm/min Rapid traverse 24/18 m/min Machine measurements 2360x2450x2600 mm Machine weight 4400 kgs

Year of construction: 2020, Condition: as good as new (ex-display), Functionality: fully functional, CNC machining center with CNC path control SIEMENS 828D SHOPMILL. In sturdy Meehanite cast design, Turcite flat guideways and hand-scraped bearing surfaces. With sturdy hardened and ground flat guideways and direct drives on the axes. In sturdy Meehanite cast design, Turcite flat guideways and hand-scraped bearing surfaces. With sturdy hardened and ground flat guides and direct drives on the axles. Technical data: TABLE Table surface 700 x 350 mm Table height from floor 835 mm T-slots 16 mm x 63.5 mm / 4 pcs. Workpiece weight max 350 kg Travels: X 610 mm Y 355 mm Z 460 mm Distance from spindle center to column surface 415 mm Distance spindle nose / table min. 70 mm / max. 530 mm SPINDLE Spindle holder SK 40 / DIN 69871 (tightening bolt: DIN 69872) Spindle speed infinitely variable 8000 rpm Spindle drive motor Siemens: 7.5 / 11.0 KW AXIS FEED, digital feed motors, direct drives All 3 feed motors are directly flange-mounted. Drive without toothed belt! Manufacturer of the ball screws: HiWiN X-axis Feed motor: Siemens Ball screw: Ø 32 x 10; C 5 Y-axis Feed motor: Siemens Ball screw: Ø 32 x 10; C 5 Z-axis Feed motor: Siemens Ball screw: Ø 32 x 10; C 5 FEED SPEEDS: Rapid traverse: 20 M/min. for X and Y-axis, 18 M/min. for Z-axis Feed rates: X - Y: 1-10 M/min. ACCURACY Positioning: (within 300 mm) +/- 0.005 mm Repeat accuracy: +/- 0.004 mm TOOL CHANGER Tool holder: DIN 69871 with tightening bolt DIN 69872 Changer system standard: Disk changer without arm Capacity: 10 tools Changing time: approx. 20 seconds max. max. tool weight: 7.0 kg largest tool diameter: 93 (120) mm max. tool length: 300 mm AIR SUPPLY Required pressure: 6.5 bar Air consumption: 300 l / min. E2n0fqe Standard accessories: - SIEMENS 828 D CNC control with "SHOPMILL" user interface - Large selection of milling and drilling cycles - Machining cycle for contour pockets / contour pins with islands, etc. - Graphic functions - Tool management - User CF card on the control panel front - RS 232 C interface - USB interface on the control panel front - RCS-Commander: front ETHERNET interface for notebook PC - 100 Mbit/sec. TCP / iP ETHERNET interface for connection to a company network - Portable electronic handwheel - Tapping without compensation chuck (Ridgid Tapping) - Spindle orientation - Color screen (LCD) 10.4" - Manual in all 3 axes - Semi-automatic with manual operation of the feed - Automatic with cycle function, CNC operation without CNC knowledge - ISO programming - Linking of cycle programs and ISO programs - Large memory for created programs - Full cabin (CE) - Heat exchanger for the control cabinet - Automatic tool clamping - Automatic tool changer with 10 tools - Spindle blow-out - Coolant system incl. oil separator - Automatic central lubrication - Work light - Electronic handwheel for all 3 axes - CE conformity, EMC filter - 24 months full warranty Siemens "RSV" - Two-tone paint finish: white RAL 7035, black RAL 7021

Year of construction: 2008, Condition: used, x-travel 1500 mm y-travel 800 mm z-travel 700 mm table surface area 1760 x 700 mm spindle taper SK 40 spindle turning speed - stepless 8000 U/min Op3csg82hd spindle drive 15 kW feeds 1 - 8000 mm/min rapid traverse X/Y/Z axis 15 / 15 / 12 m/min table load max. 2500 kg spindle throat 760 mm ATC 40 Pos control HEIDENHAIN, TNC 530 total power requirement kW weight of the machine ca. 12,5 t dimensions of machine L x W x H 4,23 x 2,98 x 2,74 m - with coolant through spindle Accessories: NC-dividing unit (=4th Axis) with tailstock, center height 250 mm; 2 hydr. vices make HILMA, model NC 160, width of jaws 160 mm; various tool holders, chip conveyor, coolant - geometrical overhauled in 2022 - - new ball bearing spindle installed on Y-axis in NOV. 2022 - - the magnetic plates shown on the photo are not included -

Year of construction: 2014, Condition: ready for operation (used), General Data Measurements width 3500 mm Measurements depth 3880 mm Machine weight 3690 kg Table Table load 250 Kg This First V700 Vertical Machining center was made in 2014. There are 2 machines available. D7tpe8w Application Types Milling

Year of construction: 2000, Condition: good (used), Classic spark EDM erosion with Mecatool set system for clamping electrodes. Ue2suwk3

Condition: used, hydraulic unit, hydraulic pump, hydraulic pump -Hydraulic unit comes: from a 15 t lifting platform -Max. Pressure: 130 bars Bdald9qxi -Tank capacity: 100 liters -Motor: 7.5 kW 1450 rpm -Equipment: emergency hand pump, hand valve, electric valve, emergency lowering, -Dimensions: 1130/445/1320 mm -Weight: 334 kg

Year of construction: 2004, Condition: used, Functionality: fully functional, TECHNICAL DETAILS x-path: 610 mm y-path: 500 mm z-path: 510 mm Table clamping surface: 1000 x 460 mm Spindle holder: BT 40 Spindle speeds - infinitely variable: 120 - 8000 rpm Spindle motor: 7.5 kW Torque at the spindle: 190 Nm Infinitely variable feeds: 1 - 8000 mm/min Rapid traverse X/Y/Z-axis: 24 / 24 / 18 m/min Table load: max. 800 kg Spindle projection: 510 mm Bjsnpt3cabl Spindle/table distance min. / max.: 120 / 630 mm Tool changer: 24 Pos Tool diameter max.: 100 mm Tool length - max.: 300 mm Tool weight max.: 10 kg MACHINE DETAILS Model: FIRST MCV 600 Year of construction: 2004 Control : Heidenhain iTNC 530 Machine length: 2,36 m Machine width: 2.45 m Machine height: 2.54 m Machine weight: approx. 4.3 t

Year of construction: 2020, Condition: as good as new (ex-display), Functionality: fully functional, CNC machining center with CNC control Siemens Sinumerik 828D (Shopmill). With fast feeds and linear guides. Technical data: TABLE Table surface: 800 x 400 mm T-slots: 18 x 100 x 3 pcs. Workpiece weight max: 250 kg Travels: X: 700 mm Rtteu7bd Y: 400 mm Z: 550 mm distance spindle nose to table : 150 - 700 mm distance table to floor : 858 mm distance spindle center to column surface : 500 mm SPINDLE Spindle mounting: SK 40 / DIN 69871 (Tightening bolt: DIN 69871 A) spindle speed stepless: 10.000 rpm - direct spindle! spindle drive motor (S1/S6): 7.0 kW / 12.5 kW AXIS FEEDS X-axis motor power: 1,8 kW ball screw: D 32 x P 16 mm Direct drive with linear guides Y-axis motor power: 1,8 kW ball screw: D 32 x P 16 mm Direct drive with linear guides Z-axis motor power: 3,0 kW ball screw: D 32 x P 16 mm direct drive with linear guides FEED RATES X-rapid feed: 48 m / min. feed rate: 1-10000 mm / min. Y-rapid feed: 48 m / min. Feed rate: 1-10000 mm / min. Z-rapid feed: 32 m / min. Feed rate: 1-10000 mm / min. TOOL CHANGER type: drum with double arm tool holder: DIN 69871 capacity: 24 tools tool changing time: 2 sec. - tool / tool Tool change time: 4 sec. - chip / chip Max. Tool length: 250 mm Max. Tool weight: 7,0 kg Max. Tool diameter: 80 mm Max. tool diameter Tool diameter (adjacent pockets free): 150 mm AIR SUPPLY Required pressure: 6,5 bar Air consumption: 400 l / min. Standard accessories: - CNC control Siemens Sinumerik 828D with Shopmill - Wide range of milling and drilling cycles - Machining cycle for contour pockets / contour pins with islands, etc. - Graphic functions - Tool management - User CF card on the front panel - USB interface on the front panel - ETHERNET interface on front panel for notebook PC - 100 Mbit/sec. TCP / iP ETHERNET interface for connection to a company network - software option - color screen LCD 10,4" - full cabin (CE) - portable electronic handwheel - hinged chain chip conveyor - swing-out control panel integrated in the cabin - free crane loading access in the door area above. 700x335 mm. - automatic 24-position tool changer with arm - automatic spindle blowing out - Milling spindle with direct drive and oil cooling system - Coolant system: cooling through the spindle with 20 bar. Separate integrated tank with oil separator. - Chip flushing aid - Coolant spray gun - Telescopic covers for all 3 axes - Automatic central lubrication - Working light - Indicator lights - Tool box - Instruction manual and spare parts list - leveling screws, plates and nuts - Painting two-tone: white RAL 7035 / black RAL 7021 - CE conformity

Year of construction: 2007, Condition: used, x-travel 1100 mm y-travel 600 mm z-travel 500 mm table surface area 1300 x 600 mm spindle taper SK 40 spindle turning speed - stepless 10.000 U/min ATC 40 Pos control HEIDENHAIN, TNC 530 total power requirement kW weight of the machine ca. 8,8 t dimensions of machine L x W x H 2,58 x 3,04 x 2,35 m 8jh3tvz3gu Accessories: 2 hydr. vices make HILMA, model NC 160, width of jaws 160 mm; various tool holders, chip conveyor, coolant

Year of construction: 2007, Condition: ready for operation (used), Control Unit Brand Heidenhain Model 530 CNC main language English CNC language customizable Yes Main Drive Number of spindles 1 Spindle speed range 10000 Movement X-Axis Movement 1020 mm Y-Axis Movement 510 mm Z-Axis Movement 510 mm Workpiece Workpiece drm 40 mm Table Outer length 1150 mm Outer width 500 mm Tools Max weight 7 kg Max tool diameter 95 mm Max tool length 300 mm Media Main electronic connection 380 V This First MCV 1000 Vertical Machining center was manufactured in the year 2007. It is equipped with a HEIDENHAIN 530 control unit. The machine has a spindle speed of 10000 rpm. Application Types Bku0ntfddgs Milling

Year of construction: 2004, Condition: used, First MCV 2000 - Vertical Machining Center with Fanuc 0i control. Dkewxt Specifications: Table dimensions: 2200 x 1000 mm X axis travel: 2050 mm Y axis travel: 1150 mm Z axis travel: 760 mm Spindle speeds: 12.000 rpm Work feed: 8.000 mm/min Rapid speed Z-axis: 15 m/min Rapid speed X - Y axis: 20 m/min Machine in stock, fast delivery

Year of construction: 2017, Condition: excellent (used), Highly efficient screw compressor Air cooled Maintenance-friendly design V-belt drive Operating pressure 8 to 10 bar Delivery quantity 1.98 m3/min – 2.11 m3/min 3iwlehxc Motor rated power 15 kW With high-efficiency motor IE 3, protection class IP 55, insulation class type F Also available with 200 liter compressed air tank + dryer (FAS 15-AT) Dimensions (LxWxH): 880mm x 830mm x 1075mm Weight: 400kg

Year of construction: 2019, operating hours: 1 h, Condition: as good as new (ex-display), machine/vehicle number: MA0013_2019040710, New 22 kW screwcompressor FirstAir Type: FAS22 Year of construction: 2019 technical spezifications: operating pressures of the system: 10 bar(ue) at 10 bar : 3250 l/min Installed power: 22 kW speed drive motor: 2950 1/min SProtection class / Insulation class Drive motor: IP55 / F Operating voltage / frequency: 400/50 V / Hz Sound pressure level (DIN 45635 T13) : 70 +/- 3 Compressed air connection:G 1 1/4" E89abmn Length : 1050 mm Width : 880 mm Height : 1260 mm Weight : 570 kg

Year of construction: 2006, Condition: used, x-travel 610 mm y-travel 500 mm z-travel 510 mm table surface area 1000 x 460 mm spindle taper SK 40 spindle turning speed - stepless 120 - 8000 U/min spindle drive 7,5 kW 8pzfyf3l70 max. torque on the spindle 190 Nm feeds -stepless- 1 - 8000 mm/min rapid traverse X/Y/Z axis 24 / 24 / 18 m/min table load capacity max. 800 kg spindle throat 510 mm distance spindle nose/ table min./ max. 120 / 630 mm ATC 24 Pos diameter of tools max. 100 mm tool length - max. 300 mm weight of tools max. 10 kg control HEIDENHAIN TNC 530 dimensions of machine L x W x H 2,36 x 2,45 x 2,54 m total power requirement kW weight of the machine ca. 4,3 t Accessories: NC-dividing unit (= 4th axis) with tailstock, center height 175 mm; hydr. vice make HILMA, model NC 125, width of jaws 125 mm; various tool holders, chip conveyor, coolant

Year of construction: 2022, operating hours: 0 h, Condition: new, New 5.5 kW screw compressor FirstAir with integrated refrigeration dryer and 200 liter compressed air tank and time-controlled steam trap Type: FAS6-200AT Year of construction: 2022 Operating pressure: 10 bar (ue) Delivery quantity at 10 bar (ue): 700 liters / min Installed motor power: 5.5 kW Protection class / insulation class drive motor: IP 55 F Operating voltage: 400V ~ 50 Hz Sound pressure level (EN ISO 2151): dB (A) 65 +/- 3 Compressed air connection: G 1/2 " Length: 1500 mm Width: 700 mm Height: 1550 mm Weight: 445 kg Drive: V-belt drive Dwpovq Visit our shop. We always have a large selection of new and used compressors in stock!

Year of construction: 2022, Condition: as good as new (ex-display), New 4 kW screwcompressor FirstAir Type: FAS4 Year of construction: 2022 technical spezifications: Ciucdrbmmv operating pressures of the system: 10 bar(ue) at 10 bar : 470 l/min Installed power: 4 kW speed drive motor: 2900 1/min SProtection class / Insulation class Drive motor: IP55 / F Operating voltage / frequency: 400/50 V / Hz Sound pressure level (DIN 45635 T13) : 65 +/- 3 Compressed air connection:G 1/2" Length : 660 mm Width : 600 mm Height : 890 mm Weight : 230 kg Visit our store !

Year of construction: 2022, Condition: as good as new (ex-display), machine/vehicle number: MA0044_SN0056019, New 4 kW screw compressor FirstAir with integrated refrigeration dryer and 200 liter compressed air tank and time-controlled steam trap Type: FAS4-200AT Year of construction: 2022 Ieju7jz Operating pressure: 10 bar (ue) Delivery quantity at 10 bar (ue): 470 liters / min Installed motor power: 4 kW Protection class / insulation class drive motor: IP 55 F Operating voltage: 400V ~ 50 Hz Sound pressure level (EN ISO 2151): dB (A) 65 +/- 3 Compressed air connection: G 1/2 " Length: 1500 mm Width: 700 mm Height: 1550 mm Weight: 435 kg Drive: V-belt drive Visit our shop. We always have a large selection of new and used compressors in stock!