milling machine

CME FS-2

Condition: good (used), TECHNICAL DATA Working range *longitudinal 1050 mm *across 350 mm *vertical 500 mm table clamping area 1400 x 300 mm drive power 7,5 kW universal milling head speed range 112- 1250 1/min speed steps 9 Horizontal milling spindle speed range 40 - 1800 1/min Speed steps 9 Tool holder ISO 40 feed range longitudinal/cross 12,5 - 1030 mm/min Number of steps 18 Feed range vertical 5.6 - 480 mm/min 2fjzobgw Number of steps 18 Machine dimensions W x D x H 2.0 x 1.8 x 1.9 m Machine weight 2100 kg EQUIPMENT/ACCESSORIES  Universal milling head  Horizontal milling spindle

Year of construction: 2004, Condition: reconditioned (used), Functionality: fully functional, Machine was overhauled by technical experts for used milling machines CME. TECHNICAL DETAILS Soekf travels: 1200 x 750 x 750 mm working speed: 20 m/min rapid traverse: 30 m/min speed: 4.000 rpm Control: Heidenhain TNC i530 table size: 1300 x 700 mm Table load: 2 t fixture: ISO-40 Power: 28 kW EQUIPMENT - electronic handwheel - chip conveyor Machine is in very good condition and ready for immediate commissioning.

Condition: ready for operation (used), Indramat MAC115A-0-FS-2-C / 180-B-1 / S001 Permanent magnet motor SN:MAC115-04930 ,used, normal signs of wear, 100% functional, scope of delivery according to photos Hg7f3gg

Year of construction: 1991, Condition: good (used), Functionality: unexamined, Equipment and accessories Cusnaud - CNC Siemens Sinumerik 820TE - 12-position turret head VDI 50 - tailstock - Various VDI 50 tool holders - 3 jaw chucks diameter 250mm - 3 jaw chucks diameter 400mm - various lathe chucks included Technical data - Swing diameter over bed 495mm - Swing diameter over slide 350mm - Center width 1250mm - max. weight of chuck parts 80kg - max. mass of center parts 400kg - Turning spindle head DIN 55026 size A2-8 - Speed range 6 to 4950 rpm - Main drive 41,5 kw - Machine weight approx. 8 tons -The machine was overhauled in 2009. -The guides are in very good condition - The documentation is available

Condition: ready for operation (used), Siemens 1FT5074-0AF01-2 - Z AC-VSA motor Z= see nameplate, SN:YFS227671301001 , the motor was overhauled at Siemens and then stored for a long time,used, normal signs of wear, 100% functional, scope of delivery according to photos G9sjirxf

Condition: new, Foot switch with metal housing Manufacturer: Steute Cyvjy9psjl type: GFS 2 1ÖS/1ÖS Condition: new - 2-pedal - with protective cover - Metal housing - Low pedal height - Connection space

Year of construction: 2012, Condition: used, Motor grinding spindle, grinding spindle, high-performance grinding spindle Ywm9vk -Manufacturer: FS / JE, motor grinding spindle from CNC machining center Santenberg GTC S 2 -FS Heinz Fiege: Type: HSP 190 182.532.01 -JE Jaeger- engineering: Type PS 200/6300min/1 GS-100-0009 -Spindle: JE type 9SH1020A042000 -Dimensions: see photos -Number: 2x spindle available (1x right, 1x left) -Price per piece -Dimensions: 820/610/H530mm / 820/500/H520mm -Weight: 185kg / 180kg

Condition: ready for operation (used), Indramat WNIIEM / 222156 Brake T - 14 24 V / 0,7 A SN:1o94016 for MAC093C-0-FS-3-C / 110-B-2 / S005 motor,used, normal traces of use, 100% functional, scope of delivery according to photos Cj2p8m88kw

mileage: 762,000 km, power: 206 kW (280.08 HP), first registration: 07/1994, fuel type: diesel, color: other, axe configuration: 4x2, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: steel-air, Year of construction: 1994, Condition: used, 🇬🇧 Information in English: Additional options and accessories 1 fuel tank, Central locking, Day Cabin, Front suspension: Leaf, Open roof, Rear suspension: Air, Sun visor More information Year of construction: 1994, Cab: day, Tyre profile: 50%, Front axle: Steering, Suspension: leaf suspension, Rear axle: Double wheels, Suspension: air suspension, Number of cylinders: 6, LxWxH: 600 x 250 x 300 cm, General condition: good, Serial number: YB1G5A4A7T1920457 🇳🇱 Information in Dutch: Additional options and accessories 1 fuel tank, Central locking, Day cab, Open roof, Rear suspension: Air, Front suspension: Leaf, Sun visor Further information O8fhzdi0t2 Year of construction: 1994, Cab: day, Tire tread: 50%, Front axle: Steering, Suspension: leaf spring, Rear axle: Twin axle, Suspension: air, Number of cylinders: 6, LxWxH: 600 x 250 x 300 cm, Overall condition: good, Serial number: YB1G5A4A7T1920457 🇫🇷 Informations en Français: Plus d'options et d'accessoires 1 réservoir de carburant, Cabine De Jour, Suspension arrière : Pneumatique, Suspension avant : Feuille, Toit ouvert, Verrouillage centralisé, Visière Plus d'informations Année de construction : 1994, Cab: jour, Sculptures des pneus : 50%, Essieu avant: Direction, Suspension: suspension à lames, Essieu arrière: Roues jumelées, Suspension: suspension pneumatique, Nombre de cylindres: 6, LxlxH: 600 x 250 x 300 cm, État général: bon, Numéro de série: YB1G5A4A7T1920457 🇩🇪 Informationen auf Deutsch: Weitere Optionen und Zubehör 1 Kraftstofftank, Federung hinten: Luft, Offenes Dach, Sonnenblende, Tageskabine, Vorderradaufhängung: Blatt, Zentralverriegelung Further information Konstruktionsjahr: 1994, Kabine: Tag, Reifen Profil: 50%, Vorderachse: Gelenkt, Federung: Blattfederung, Hinterachse: Doppelbereift, Federung: Luftfederung, Zylinderzahl: 6, L x W x H: 600 x 250 x 300 cm, Allgemeiner Zustand: gut, Seriennummer: YB1G5A4A7T1920457

overall weight: 23 kg, total length: 50 cm, total width: 20 cm, total height: 25 cm, Condition: excellent (used), Rexroth MAC093C-1-FS-4-C/110-A-2/WI524LV/S001 SN: MAC093-28460 Ctfz3y07

Year of construction: 1998, Condition: used, Permanent magnet motor, permanent magnet motor, electric motor, permanent magnet motor, permanent magnet motor, servo motor -Max. Speed: 3000 rpm -Shaft: Ø 24 mm -Tachometer Indramat type: DG 1604 -Number: 1x motors available -Price: per piece -Dimensions: 570/140/H200 mm -Weight: 24 kg/piece 932ii3b

Year of construction: 2018, Condition: good (used), Spray bonding machine / drum melting machine Cddvfvwlpn Manufacturer: Bühnen GmbH u. Co. KG Type: HB4020 2FS ZPR Year of construction: 2018 Discharge: 2 x heated hose (approx. 15m) with spray gun HB 910 Power: 7kw Temperature range: max 180 degrees weight: 240kg Dimensions mm: 1260 x 750 x 1580 Condition: little used ready for use, cleaning necessary when changing glue

Condition: ready for operation (used), Indramat rotor for MAC093C-0-FS-3-C / 110-B-2 / S005 engine, used, normal signs of wear, 100% functional, scope of supply according to photos D0f8cq

Condition: ready for operation (used), Indramat housing with stator for MAC093C-0-FS-3-C / 110-B-2 / S005 motor,used, normal traces of use, 100% functional, scope of supply acc. photos F83hjorp

Condition: ready for operation (used), Indramat 109-0780-4B01-01 TKF3 Tacho SN:KH10530 MAC093C-0-FS-3-C / 110-B-2 / S005 engine,used, normal signs of use, 100% functional, scope of supply according to photos Cj2lsbfep9

power: 634 kW (862.00 HP), fuel type: diesel, number of cylinders: 12, Condition: excellent (used), We have two used engines in very good condition for sale. Technical data: Engine : Mitsubishi TypeNo. : 12 Cylinder , V12 BiTurbo Diesel , S12A2 - C2MPTK Power : 634 KW / 863 PS at 1940 rpm Condition : very good Location : 24229 Kiel (Dänischenhagen) Price on request Nqtukdgf Delivery against on price is possible nationwide

overall weight: 1,500 kg, empty load weight: 876 kg, maximum load weight: 624 kg, axe configuration: 1 axle, loading space length: 4,000 mm, loading space width: 2,200 mm, loading space height: 2,300 mm, color: white, Condition: new, * IMMEDIATELY AVAILABLE * Sheet steel sandwich construction 40mm walls, braked, PVC floor, 2x sales hatch + bag shelf, gas door TECHNICAL DATA - Vehicle type: Box trailer - Vehicle condition: New vehicle - First registration: without first registration - TÜV/HU: 2 years from first registration - Interior dimensions (LxWxH): approx. 397 x 227 x 230 cm - External dimensions (LxWxH): approx. 552 x 235 x 294 cm - Permissible total weight: 1,500 kg - Unladen weight: 890 kg Bjvfr3v8c2a - Payload: 610 kg - Chassis: High loader (wheels under the body) - Tires: 195/50R13C - Chassis: KNOTT rubber spring axle - Support wheel: Yes, standard with clamp - 100 km/h approval: Optional, can be retrofitted Vehicle body: - Brake: Yes - Number of axles: 1 - Floor: Wooden floor - Walls material: Sheet steel sandwich insulated 40mm - Roof material: Sheet steel sandwich insulated 40mm - Color: white - Tilt / lowering function: Without - Overrun device/brake: KNOTT - Frame/chassis: Welded steel frame - Galvanization: hot-dip galvanized - Drawbar: V-drawbar - Mudguards: Plastic - Side door: No - Side flap: Yes: right and rear - Rear doors / tailgate: Door in front - Rear door / tailgate Material: - - Tailgate load: - - Clearance dimension rear: - - Locks for box body: Standard door latch - Drive-on angle: - - Supports: 4x scissor supports, rotatable - Lashing rails: Optional, can be retrofitted - Lashing eyes: Optional, can be retrofitted - Interior light: Optional, can be retrofitted - Rear lighting: Incandescent lamps, lamps mounted on the rear wall - Side lighting: - - Plug for lighting: 13-pin - Vehicle documents: COC papers Standard equipment: - Sturdy V-drawbar, hot-dip galvanized in an immersion bath - Single-axle trailer - Overrun hitch from KNOTT - Base plate made of multiplex - Side walls made of very solid sheet steel sandwich, 40 mm thick - Sales hatch on the right side + bag rack - Rear sales hatch + bag rack - PVC covering on the floor - Door in front wall, lockable from inside and outside - Step on the drawbar - Support wheel with clamp - 4x scissor supports mounted incl. crank - Automatic reverse drive - Plastic mudguards - 13-pin plug - Reversing lights - Large dimensioned safety lighting - Integrated rear fog light - Registration papers: COC papers Accessories can be retrofitted at extra cost - please enquire New vehicle with warranty and TÜV. -----

overall weight: 1,500 kg, empty load weight: 736 kg, maximum load weight: 764 kg, axe configuration: 1 axle, loading space length: 3,500 mm, loading space width: 2,000 mm, loading space height: 2,300 mm, color: white, Condition: new, * IMMEDIATELY AVAILABLE * Sheet steel sandwich construction 40mm walls, braked, PVC floor, 2x sales hatch + bag shelf, gas door TECHNICAL DATA - Vehicle type: Box trailer - Vehicle condition: New vehicle - First registration: without first registration - TÜV/HU: 2 years from first registration - Interior dimensions (LxWxH): approx. 347 x 197 x 230 cm - External dimensions (LxWxH): approx. 502 x 205 x 294 cm - Loading height of the floor: 55 cm - Permissible total weight: 1,500 kg - Unladen weight: 736 kg - Payload: 764 kg - Chassis: High loader (wheels under the body) - Tires: 195/50R13C - Chassis: KNOTT rubber spring axle - Support wheel: Yes, standard with clamp - 100 km/h approval: Optional, can be retrofitted Vehicle body: - Brake: Yes Dnldcx - Number of axles: 1 - Floor: Wooden floor - Walls material: Sheet steel sandwich insulated 40mm - Roof material: Sheet steel sandwich insulated 40mm - Color: white - Tilt / lowering function: Without - Overrun device/brake: KNOTT - Frame/chassis: Welded steel frame - Galvanization: hot-dip galvanized - Drawbar: V-drawbar - Mudguards: Plastic - Side door: No - Side flap: Yes: right and rear - Rear doors / tailgate: Door in front - Rear door / tailgate Material: - - Tailgate load: - - Clearance dimension rear: - - Locks for box body: Standard door latch - Drive-on angle: - - Supports: 4x scissor supports, rotatable - Lashing rails: Optional, can be retrofitted - Lashing eyes: Optional, can be retrofitted - Interior light: Optional, can be retrofitted - Rear lighting: Incandescent lamps, lamps mounted on the rear wall - Side lighting: - - Plug for lighting: 13-pin - Vehicle documents: COC papers Standard equipment: - Sturdy V-drawbar, hot-dip galvanized in an immersion bath - Single-axle trailer - Overrun hitch from KNOTT - Base plate made of multiplex - Side walls made of very solid sheet steel sandwich, 40 mm thick - Sales hatch on the right side + bag rack - Rear sales hatch + bag rack - PVC covering on the floor - Door in front wall, lockable from inside and outside - Step on the drawbar - Support wheel with clamp - 4x scissor supports mounted incl. crank - Automatic reverse drive - Plastic mudguards - 13-pin plug - Reversing lights - Large dimensioned safety lighting - Integrated rear fog light - Registration papers: COC papers Accessories can be retrofitted at extra cost - please enquire New vehicle with warranty and TÜV. -----

Year of construction: 1975, Condition: used, wire diameter 0,2-0,9 mm Bjzu8nx9igv spring diameter 1 - 20 mm feeding length 4 - 1280 mm output pieces/min 11 - 420

travel distance X-axis: 1,120 mm, travel distance Y-axis: 345 mm, travel distance Z-axis: 400 mm, table width: 400 mm, table length: 1,600 mm, Condition: used, Vertical console milling machine WMW HECKERT type FSS 400 VI/2 serial number 324606/90 Hrcuab8lt Technical data: Table clamping surface 1600 x 400 mm X-axis travel 1120 mm Y-axis travel 345 mm Z-axis travel 400 mm Distance from spindle center to column sliding surface 450 mm Distance from spindle nose to table surface 100 - 500 mm Feed range longitudinal/ transverse 16 - 800 mm/min Vertical feed range 5 - 250 mm/min Rapid traverse lengthwise/ crosswise 3150 mm/min Rapid traverse vertical 1000 mm/min Creep speed longitudinal/ transverse 50 mm/min Creep speed vertical 16 mm/min Max. table load 1500 kg Tool holder ISO 50 Milling spindle head swivels right and left 45° Speed range (18) 28 - 1400 rpm. Diameter of the front bearing 100 mm Axial adjustment of the milling spindle 90 mm Drive power of the milling spindle 11 kW Drive power feed 2.2 kW Total energy requirement 14.5 kW Weight approx. 4.0 t External dimensions - space requirement 3500 x 2920 x 2710 mm high Transport dimensions of machine L x W x H 1700 x 2000 x 2550 mm Color beige With - swiveling control panel - swiveling milling spindle head - switch cabinet 800 x 450 x 1350 mm used, in good condition

Condition: new, SKF T-1038929-4/2 / WM0BB127A/G Grinding spindle,unused, 100% functional, scope of delivery according to photos,ATTENTION: Please inquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Jfeqx2yt

Condition: used, Milling machine Type FSS 400/2 Column-type milling machine Table dimensions 400 x 1,600 mm Max. Table load 1,500 kg, Traverses: lengthwise 1350 mm transverse 345/370 mm, vertical 400/430 mm Dngtll 18 speeds from 28 - 1,400 rpm Milling spindle 11 kW Feed 2.2 kW Option 01 1 set of machining tools 1300,-€ consisting of: 5 disk cutters 7 collets 5 end mills 1 as good as new Coromill R200 face milling cutter with inserts 5 tool holders with shank milling arbor 2 tool holders for shank tools 2 collet chucks Option 02 1 dividing head 500,-€ Option 03 1 universal table 600,-€ Total connected load 14.5 kW. Weight 4,000 kg.

Year of construction: 1989, Condition: ready for operation (used), Power: 45 kW Diameter magnet plate: 1.000 mm ø Diameter of rotating magnet: 1.000 mm ø Weigth: around 10 to B7mllakia8

rotational speed (min.): 1,390 rpm, grinding wheel diameter: 315 mm, Year of construction: 1968, Condition: used, Double grinder VEB Dresden type 2/115S 0p3oihwa serial # 38661, year of construction 1968 Technical data: Grinding wheel diameter 315 mm Grinding wheel width 40 mm Speed 1390 rpm Weight 93 kg With - 2 grinding wheels (1 x coarse, 1 x fine) Used

Condition: used, High current EMC filter SCHAFFNER type FS 20364-1200-99 3 phases, 3 x AC ballast, mains connection module, mains filter Input voltage: 3 x 400 VAC Input frequency: 50 / 60 Hz. Bdvzij9k8w Rated current: 3 x 1200 A Dimension W x H x D: 135 x 260 x 235 mm weight: 27,5 Kg very good condition, from stock liquidation, unused 2 pieces available, price per piece