progressive thread - isomed
progressive thread - isomed
progressive thread - isomed
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Conical implants with<br />
internal hexagon<br />
connection and<br />
double - <strong>progressive</strong><br />
<strong>thread</strong><br />
Progressive
xxx<br />
xxx ISOMED implant system<br />
2
Conical implants with<br />
internal hexagon<br />
connection and<br />
double - <strong>progressive</strong> <strong>thread</strong><br />
4,0 mm<br />
4,0 mm<br />
diameter<br />
Progressive<br />
Platform - support surface ø 4 Dimensions of internal hexagon<br />
4,5 mm<br />
4,5 mm<br />
diameter<br />
5,0 mm<br />
5 mm<br />
diameter<br />
6,0 mm<br />
6 mm<br />
diameter<br />
2,4 mm<br />
4,0-4,5-5 mm<br />
diameter<br />
3 mm<br />
6 mm<br />
diameter
Conical implants with internal hexagon connection<br />
and double - <strong>progressive</strong> <strong>thread</strong><br />
Micro-<strong>thread</strong><br />
for connection<br />
to the cortical<br />
bone<br />
Clinical research showed that<br />
the micro-<strong>thread</strong> on the neck<br />
of the implant results in an<br />
optimal distribution of loads,<br />
thus safeguarding bone cortex.<br />
The integrity of the marginal bone<br />
guarantees a good anchorage of the<br />
implant while supporting soft tissues<br />
for a better aesthetic result.<br />
Trapezoidal <strong>thread</strong><br />
flattened at the<br />
third coil at cortical<br />
end<br />
Morphology<br />
Detail of the first (bone<br />
cutting) <strong>thread</strong>s<br />
Switching platform<br />
Controlled<br />
roughness<br />
achieved<br />
through etching<br />
for enhanced<br />
“PROGRESSIVE” - Isomed’s new implant with internal hexagon connection switching platform<br />
is indicated in all bone classes and has exceptional primary stability (even in very trabecular bone<br />
tissues) thanks to its double <strong>thread</strong> structure. The distinctive trait of this implant is that it has a<br />
double <strong>progressive</strong> trapezoidal <strong>thread</strong> flattened at the third coil from coronal end (after a 3 mm micro<br />
<strong>thread</strong>) and becoming increasingly aggressive and sharp at the third coil from apical end, thus offering<br />
excellent primary stability.<br />
Implant’s structure at coronal end is designed to preserve hard tissue causing a reduced trauma to<br />
surrounding bone tissue. Structure at the apical end allows the surgeon to change the inclination while<br />
inserting the implant in order to achieve optimal angle.<br />
Double <strong>thread</strong> with a 2.3 mm pitch gives this implant some unique properties: self-cutting, self<strong>thread</strong>ing<br />
and self-condensing.<br />
Thanks to its internal hexagon connection and a switching platform that offers a distancing element<br />
between the marginal bone and implant – abutment contact, this implant is particularly useful in the<br />
aesthetic areas.
Conical implants with internal hexagon connection<br />
and double - <strong>progressive</strong> <strong>thread</strong><br />
Implant ø 4 mm<br />
PROGRESSIVE 4-8,5 h. 8,5 mm<br />
PROGRESSIVE 4-10 h. 10 mm<br />
PROGRESSIVE 4-11,5 h. 11,5 mm<br />
PROGRESSIVE 4-13 h. 13 mm<br />
PROGRESSIVE 4-14,5 h. 14,5 mm<br />
Implant ø 4,5 mm<br />
PROGRESSIVE 4,5-8,5 h. 8,5 mm<br />
PROGRESSIVE 4,5-10 h. 10 mm<br />
PROGRESSIVE 4,5-11,5 h. 11,5 mm<br />
PROGRESSIVE 4,5-13 h. 13 mm<br />
PROGRESSIVE 4,5-14,5 h. 14,5 mm<br />
Implant ø 5 mm<br />
PROGRESSIVE 5-8,5 h. 8,5 mm<br />
PROGRESSIVE 5-10 h. 10 mm<br />
PROGRESSIVE 5-11,5 h. 11,5 mm<br />
PROGRESSIVE 5-13 h. 13 mm<br />
PROGRESSIVE 5-14,5 h. 14,5 mm<br />
Implant ø 6 mm<br />
PROGRESSIVE 6-8,5 h. 8,5 mm<br />
PROGRESSIVE 6-10 h. 10 mm<br />
PROGRESSIVE 6-11,5 h. 11,5 mm<br />
PROGRESSIVE 6-13 h. 13 mm<br />
Implants can be supplied with both small or big mounter.<br />
5
Prothesic components for conical implants with internal<br />
hexagon connection and double - <strong>progressive</strong> <strong>thread</strong><br />
Parallel sided transgingival healing cap<br />
TDNI-1,5 h. 1,5 mm for implants ø 4 - 4.5 and 5 mm – platform ø 4 mm<br />
TDNI-3 h. 3 mm for implants ø 4 - 4.5 and 5 mm – platform ø 4 mm<br />
TDNI-5 h. 5 mm for implants ø 4 - 4.5 and 5 mm – platform ø 4 mm<br />
Tapered transgingival healing cap<br />
TSNI-3 h. 3 mm for implants ø 4 - 4.5 and 5 mm – platform ø 4 mm<br />
TSNI-5 h. 5 mm for implants ø 4 - 4.5 and 5 mm – platform ø 4 mm<br />
Parallel sided transgingival healing cap<br />
TDKI-3 h. 3 mm for implants ø 6 mm - platform ø 5 mm<br />
TDKI-5 h. 5 mm for implants ø 6 mm - platform ø 5 mm<br />
Tapered transgingival healing cap<br />
TSKI-3 h. 3 mm for implants ø 6 mm - platform ø 5 mm<br />
TSKI-5 h. 5 mm for implants ø 6 mm - platform ø 5 mm<br />
Straight titanium abutment<br />
TMNI for implants ø 4 - 4.5 and 5 mm – platform ø 4 mm<br />
TMKI for implants ø 6 mm - platform ø 5 mm<br />
Straight zirconia abutment<br />
ZMNI for implants ø 4 - 4.5 and 5 mm – platform ø 4 mm<br />
6
Prothesic components for conical implants with internal<br />
hexagon connection and double - <strong>progressive</strong> <strong>thread</strong><br />
Cylindric titanium abutment<br />
TMNIc for implants ø 4 - 4.5 and 5 mm – platform ø 4 mm<br />
TMKIc for implants ø 6 mm - platform ø5 mm<br />
Straight titanium abutment with shoulder<br />
TMNIb1 h. 1 mm for implants ø 4 - 4.5 and 5 mm – platform ø 4 mm<br />
TMNIb2 h. 2 mm for implants ø 4 - 4.5 and 5 mm – platform ø 4 mm<br />
TMNIb3 h. 3 mm for implants ø 4 - 4.5 and 5 mm – platform ø 4 mm<br />
TMKIb1 h. 1 mm for implants ø 6 mm - platform ø 5 mm<br />
TMKIb2 h. 2 mm for implants ø 6 mm - platform ø 5 mm<br />
TMKIb3 h. 3 mm for implants ø 6 mm - platform ø 5 mm<br />
Millable overturned cone titanium<br />
abutment (titanium grade 2)<br />
TMCRIN for implants ø 4 - 4.5 and 5 mm – platform ø 4 mm<br />
TMCRIK for implants ø 6 mm - platform ø 5 mm<br />
Zirconia angled 15 degrees abutment<br />
ZMANI15 for implants ø 4 - 4.5 and 5 mm – platform ø 4 mm<br />
Angled 15-20-25 degrees abutment<br />
TMANI15/TMANI20/TMANI25 for implants ø 4 - 4.5 and 5 mm<br />
– platform ø 4 mm<br />
TMAKI15/TMAKI20 for implants ø 6 mm - platform ø 5 mm<br />
Castable plastic cylinder with platinum plated base<br />
OUNI-ce OUNI-se for implants ø 4 - 4.5 and 5 mm – platform ø 4 mm<br />
OUKI for implants ø 6 mm - platform ø 5 mm<br />
Note: ce with hexagon - se without hexagon<br />
Castable plastic cylinder<br />
RUNI-ce RUNI-se for implants ø 4 - 4.5 and 5 mm – platform ø 4 mm<br />
RUKI-ce RUKI-se for implants ø 6 mm - platform ø 5 mm<br />
Note: ce with hexagon - se without hexagon<br />
7
Prothesic components for conical implants with internal<br />
hexagon connection and double - <strong>progressive</strong> <strong>thread</strong><br />
h 1<br />
Plastic bar with knight connectors<br />
CAVAC steel rider (female)<br />
BRC plastic pattern bar (male) - length 55 mm - ø 1,9 mm<br />
Converter from internal to external hexagon connection<br />
Transforms the internal to external hexagon connection with 0,7mm high<br />
hexagon<br />
TIEN1 Converter from internal to external hexagon h.1 mm<br />
TIEN2 Converter from internal to external hexagon h.2 mm<br />
RUNE-ce castable plastic cylinder for implants with external hexagon<br />
and platform ø4 mm<br />
RUNE-se castable plastic cylinder for implants with external hexagon<br />
and platform ø4 mm<br />
Note: ce with hexagon - se without hexagon<br />
Straight ratchet extension with castable-rotating<br />
plastic cone<br />
It solve problems of parallelism and provide a passive position of bar and bridges.<br />
CONI-D h. 1 mm for implants with internal hex. with platform ø4 mm<br />
RUC-I castable-rotating plastic cone with connecting screw<br />
TMNI-coni rotating-conical abutment with connecting screw<br />
Angled 17/30 degrees ratchet extension with<br />
castable-rotating plastic cone<br />
It solve problems of parallelism and provide a passive position of bar and<br />
bridges.<br />
CONI-17 for implants with internal hexagon with platform ø 4 mm<br />
with connecting-fastening screw<br />
CONI-30 for implants with internal hexagon with platform ø 4 mm<br />
with connecting-fastening screw<br />
RUCA-I castable-rotating plastic cone with connecting screw<br />
TMNI-coni-A rotating-conical abutment with connecting screw<br />
Hex driver for fastening screws - only for CONI-17<br />
SKI-C screwdriver for connecting screws indispensable with- CONI17<br />
Implant analog<br />
SANI for implants ø 4 - 4.5 and 5 mm – platform ø 4 mm<br />
SAKI for implants ø 6 mm - platform ø 5 mm<br />
SAN-K for connectors angled at 17/30 degrees<br />
8
Prothesic components conical for implants with internal<br />
hexagon connection and double - <strong>progressive</strong> <strong>thread</strong><br />
Ball abutment ø 2,2 mm with retaining cap<br />
TMNI P2,2-0 h. 0 mm for impl. ø 4 - 4.5 and 5 mm – platform ø 4 mm<br />
TMNI P2,2-2 h. 2 mm for impl. ø 4 - 4.5 and 5 mm – platform ø 4 mm<br />
TMNI P2,2-3 h. 3 mm for impl. ø 4 - 4.5 and 5 mm – platform ø 4 mm<br />
TMKI P2,2-0 h. 0 mm for implants ø 6 mm - platform ø 5 mm<br />
TMKI P2,2-2 h. 2 mm for implants ø 6 mm - platform ø 5 mm<br />
TMKI P2,2-3 h. 3 mm for implants ø 6 mm - platform ø 5 mm<br />
(also available with ball attachment ø3 mm)<br />
Locator<br />
LOKI Hemisphere for implants with internal hex. connection and Ø 4mm<br />
platform<br />
This type of hemisphere (LOKI) is produced in different heights:<br />
0; 1; 2; 3 and 4mm<br />
Protective disc<br />
DSP<br />
Retaining steel cap with teflon retainer<br />
CA Retaining metal housing<br />
CNA orange teflon retainer (soft)<br />
CNR red teflon retainer (medium)<br />
CNV green teflon retainer (strong)<br />
Retaining titanium cap for ball attachment<br />
TC00-3,0 Titanium retaining cap for ball attachment ø 3,0 mm<br />
TC00-2,2 Titanium retaining cap for ball attachment ø 2.2 mm<br />
Retaining cap for implants impression<br />
PC00<br />
Transfer with retaining cap for implants impression<br />
TRNI-A Transfer with impression cap for implants ø 4-4,5 and<br />
5 mm - platform ø4 mm, with connecting screw (TP00)<br />
TRKI-A Transfer with impression cap for implants ø 6mm diam. -<br />
platform ø5 mm, with connecting screw (TP01)<br />
Transfer<br />
SRNI for implants ø 4 - 4.5 and 5 mm – platform ø 4 mm<br />
SRKI for implants ø 6 mm - platform ø 5 mm<br />
Long connecting screw<br />
SP01 M1,8 for implants ø4-4,5 e 5 mm<br />
SP02 M2,0 for implants ø6 mm<br />
9
8 mm<br />
10 mm<br />
12 mm<br />
14 mm<br />
16 mm<br />
xxx Instruments for conical implants with internal hexagon<br />
xxx connection and double - <strong>progressive</strong> <strong>thread</strong><br />
Connecting screw<br />
TP00 M1,8 for implants ø4-4,5 e 5 mm<br />
TP01 M2,0 for implants ø6 mm<br />
Gold plated connecting screw<br />
TP00-AU M1,8 for implants ø4-4,5 e 5 mm<br />
TP01-AU M2,0 for implants ø6<br />
Pilot drill<br />
SF00<br />
Conic drills with stop of depth<br />
SF40-8,5/10/11,5/13/14,5 for imp. ø4 h. 8,5-10-11,5-13-14,5 mm<br />
SF45-8,5/10/11,5/13/14,5 for imp. ø4,5 h. 8,5-10-11,5-13-14,5 mm<br />
SF50-8,5/10/11,5/13/14,5 for imp. ø5 h. 8,5-10-11,5-13-14,5 mm<br />
SF60-8,5/10/11,5/13 for imp. ø6 h. 10-11,5-13 mm<br />
Cylindrical drills with depth markings<br />
SF32 for implants ø 4,0 mm<br />
SF38 for implants ø 4,5 mm<br />
SF45 for implants ø 5,0 mm<br />
SF55 for implants ø 6,0 mm<br />
Square head driver with connection 4x4 mm<br />
SG-00<br />
Ratchet wrench with connection 4x4 mm<br />
ST-00<br />
10
Instruments for conical implants with internal hexagon<br />
connection and double - <strong>progressive</strong> <strong>thread</strong><br />
Pen driver for fastening screws with hex. 1,28 mm<br />
SKI-P<br />
Adjustable dynamometric key from 15 to 35 Ncm<br />
ST-D-00 dynamometric key<br />
SKI-N digital screwdriver - extension ø 1,28 mm<br />
SKE-N digital screwdriver - extension ø 0,9 mm<br />
Screwdriver for connecting screws with hex. ø1,28 mm<br />
SKI-10 h. 10 mm<br />
SKI-13 h. 13 mm<br />
Screwdriver with hex. ø 0,9 mm for ball attachment ø<br />
2,2 mm<br />
SKE-10 h. 10 mm<br />
SKE-13 h. 13 mm<br />
Ratchet extension with connection 4x4 mm<br />
SI-10 h. 10 mm<br />
SI-15 h. 15 mm<br />
Drill extension<br />
PSF<br />
Contra mount driver<br />
SD-00<br />
11
Instruments for conical implants with internal hexagon<br />
connection and double - <strong>progressive</strong> <strong>thread</strong><br />
Driver for implants with inside hexagon 2,4 mm<br />
PI ø4 e 4,5-5 mm<br />
Mucotome - manual tissue punch<br />
SD-03 ø3 mm<br />
SD-04 ø4 mm<br />
SD-05 ø5 mm<br />
Rotary tissue punch<br />
CMU-450 external ø4,5 mm - internal ø3,5 mm<br />
CMU-510 external ø5,1 mm - internal ø4,1 mm<br />
Bone tap used to correct the internal <strong>thread</strong> ø 1,8 mm<br />
SV-TP00 for implants ø4 e 4,5-5 mm<br />
Bone tap used to correct the internal <strong>thread</strong> ø 2,0 mm<br />
SV-TP01 for implants ø 6 mm<br />
Trephine burs with depth markings<br />
SFCR3 ø internal 3 mm<br />
SFCR4 ø internal 4 mm<br />
SFCR5 ø internal 5 mm<br />
12
Surgical protocol<br />
CONICAL IMPLANT WITH MEDIUM THREAD ø 4 h. 13<br />
SD-04<br />
MUCOTOME<br />
CONICAL IMPLANT WITH MEDIUM THREAD ø 4,5 h. 13<br />
SD-04<br />
MUCOTOME<br />
CONICAL IMPLANT WITH MEDIUM THREAD ø 5 h. 13<br />
SD-04<br />
MUCOTOME<br />
SF00<br />
PILOT DRILL<br />
SF00<br />
PILOT DRILL<br />
SF00<br />
PILOT DRILL<br />
SF40-13<br />
CONICAL DRILL<br />
SF45-13<br />
CONICAL DRILL<br />
SF50-13<br />
CONICAL DRILL<br />
13<br />
SF32<br />
CYLINDRICAL<br />
DRILL<br />
SF38<br />
CYLINDRICAL<br />
DRILL<br />
SF45<br />
CYLINDRICAL<br />
DRILL<br />
PROGRESSIVE<br />
PROGRESSIVE<br />
PROGRESSIVE
Surgical protocol<br />
CONICAL IMPLANT WITH MEDIUM THREAD ø 6 h. 13<br />
SD-04<br />
MUCOTOME<br />
SF00<br />
PILOT DRILL<br />
SF60-13<br />
CONICAL DRILL<br />
14<br />
SF55<br />
CYLINDRICAL<br />
DRILL<br />
PROGRESSIVE
ISOMED implant System<br />
• IMPLANT PACKAGING<br />
Implant packaging was carefully studied in<br />
order to make handling the product easier<br />
Each packaging consists of:<br />
- Double blister pack<br />
- Seal of warranty guaranteeing the integrity<br />
of the ampoule<br />
- Personal card<br />
- Informative label<br />
- Color code label<br />
- Instructions<br />
LABEL<br />
Product code<br />
Production lot<br />
Product description<br />
Certified in accordance<br />
with 93/42/EEC directive<br />
and all following related<br />
amendments and medical<br />
dispositivei<br />
• Legend<br />
Best before Manufacturer<br />
PERSONAL CARD<br />
Studio dentistico Dott.<br />
Via<br />
Città<br />
Tel. data<br />
POSIZIONE DI INSERIMENTO DELL’IMPIANTO CONSIGLI PER IL PAZIENTE<br />
18 17 16 15 14 13 12 11<br />
48 47 46 45 44 43 42 41<br />
Abbreviation Description<br />
Imp. Implant<br />
ex-est external hexagon<br />
ex-int internal hexagon<br />
tran. transmucosal<br />
tor. outer hex. height<br />
m.p. small mounter<br />
01 2016 ISOMED<br />
REF TV4-4-Tr-1,2-MG<br />
LOT 30410/AE<br />
STERILE R<br />
Imp.conico ex-est. spira larga tran.<br />
Ø4mm spire 4 tor.1,2-MG<br />
0426<br />
Personal card is a proper ID document for all<br />
the components used during the surgery. It<br />
is given to the patient so he/she could trace<br />
the used components even if he/she changes<br />
dentist<br />
Guidelines for<br />
the patients<br />
Position of the<br />
inserted implant<br />
21 22 23 24 25 26 27 28<br />
31 32 33 34 35 36 37 38<br />
Tel. 049 8629612<br />
Fax. 049 8629816<br />
Via Mameli, 50 - 35020 - Albignasego (PD) Italy<br />
Si raccomanda una accurata igiene orale, l’uso di spazzolini<br />
adeguati e di scovolini per gli spazi interdentali, soprattutto<br />
intorno ai monconi degli impianti. Si sconsiglia il fumo, l’uso di<br />
ultrasuoni per la pulizia dei monconi degli impianti, di sottoporre<br />
a carichi traumatizzanti gli impianti. Si ricorda che sono<br />
necessarie visite periodiche dal proprio dentista, almeno ogni sei<br />
mesi, per i controlli della protesi e degli impianti endossei.<br />
Abbreviation Description<br />
MG big mounter<br />
VdG healing cap<br />
mon. abutment<br />
tit. titanium<br />
coll. implant neck<br />
fres. millable<br />
15<br />
Dental Studio<br />
information<br />
4,0<br />
ISOMED s.r.l.<br />
via G. Mameli, 50/52<br />
35020 Albignasego (PD)<br />
tel. 049.8629605<br />
tel. 049.8629612<br />
fax 049.8629816<br />
Sterilized with ionized<br />
rays process<br />
Implant label<br />
Single use only,<br />
do not reuse<br />
Attention!<br />
Read carefully the<br />
instructions before use<br />
Implant<br />
manufacturer<br />
PERSONAL CARD<br />
per il paziente<br />
01 2016 ISOMED<br />
www.<strong>isomed</strong>.it<br />
Tel. 049 8629612<br />
Fax. 049 8629816<br />
Via Mameli, 50 - 35020 - Albignasego (PD) Italy<br />
REF TV4-4-Tr-1,2-MG<br />
STERILE<br />
LOT 30410/AE R<br />
Imp.conico ex-est. spira larga tran.<br />
Ø4mm spire 4 tor.1,2-M.G.<br />
0426<br />
Abbreviation Description<br />
con. converter<br />
ang. angled<br />
plat. platinum plated<br />
calc. plastic cylinder
Via G. Mameli, 50/52<br />
35020 Albignasego (Pd) Italy<br />
tel. +39 049 8629612<br />
fax +39 049 8629816<br />
w w w . i s o m e d . i t
Change language